Home > Jointers >

Model 40180H-CT (with HSS tips)
Model 40180H-CT (with HSS tips)


 
Alternative Views:


Our Price Each: $399.99

Stock Status:In Stock
Availability:: Usually Ships in 24 to 48 Hours
Product Code: 40180H-CT
Qty:

Specifications Technical Specs
 

Have a look at our 8" model 40180H-CT bench top jointer with spiral style cutterhead! With it's width capacity of 8" and 33 1/2" overall table length, which is extendable to 51" total length, what more could you ask for in a bench top portable jointer? Featuring 16 HSS (high speed steel) 2-sided inserts you get a great finish and tear out is reduced due to better chip evacuation through its included 2 ½” and 4" dust port adapter. The one piece 4 3/8” high by 19 3/4” long adjustable fence can be tilted from 90 to 135 degrees with ease. The cast aluminum infeed and outfeed tables can easily be leveled if the need occurs and so can the extensions. At about 49 lbs, and with a 120 VOLT 10 AMP motor, it’s a tough machine and can be easily transported to the job site if necessary. Push blocks and the tools necessary for rotating or replacing the cutter tips are included!

Click here to see the User Manual

Click here for WOOD Magazine 8" jointer review !!!

Can't decide whether you need a model with HSS or carbide tips? Click here....

Features
  • Powerful 10 Amp 120V motor
    Spiral Style Cutterhead with 16 HSS Inserts
    Fence with 90 to 135 Degree Tilt
    Adjustable and expandable table extensions


Accessories
Part 40938 Part 40930
Our Price Each: $59.99
Sale Price: $44.99
Our Price Each: $39.99
Sale Price: $29.99
Part 40938 Part 40930

Average Rating: 4.5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
Upgrading Jointer April 17, 2019
Reviewer: Deborah L. from Texas  
This was my second jointer and my first Cutech jointer.  I would recommend this jointer for anyone with a limited space shop.  The Customer service has been excellent.  Some where between the factory and my home the jointer first ordered had been dropped. Providing pictures Cutech promptly provided a return label and shipped out a new jointer.  Thank you and I am a Cutech Customer for life.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
My first Jointer February 6, 2019
Reviewer: Mike W from Freedom WI  
I bought this abourt 3 mos. ago and have mainly used it to joint 2"x6"x 6' reclaimed white oak boards.  First off, thru no fault of Cutech, seems a little small for such large wood. I have a hard time squaring up the boards. The base seems a bit small. If I get the wood close with a hand planer it works a lot better. Works well on smaller cuts..... I do like the table extentions & the machine has plenty of power.

Recently I noticed many scratches on the tops. (mainly the out feed table. I contacted Cutech and their responds very fast telling me that that should not happen and that they will send 2 new replacement tops. It took only 3 days to recieve the new ones GREAT CUSTOMER SERVICE.  Over all I am very happy with Cutech & their products. I would recomend Cutech & their products to any small shop woodworkers.

Was this review helpful to you?