Home > Planers >

Model 40700HC-CT
Model 40700HC-CT

Alternative Views:

Our Price Each: $379.99

Stock Status:In Stock
Product Code: 40700HC-CT


Is your limited budget keeping you from owning that spiral style planer you really want but you thought you couldn’t afford? Think again…

Check out our spiral style wood thickness planer with carbide tips, the budget model 40700HC-CT!

Built to the same high quality standards as all our other machines, this model allows you to show off your woodworking skills without breaking the bank.

Starting with our popular base budget model 40700-CT straight knife planer, we’ve added a spiral style cutterhead featuring 24 carbide 2-sided cutting tips, a depth of cut indicator gauge, longer infeed and outfeed tables, and have added a 2 1/2" and 4" dust port adapter. All what you asked for at an affordable price! This latest model still employs the powerful 120 VOLT 15 AMP motor, 10,000 RPM cutterhead speed and 26 FPM feed rate.

You will not find a less expensive spiral style planer anywhere…so what are you waiting for?

Can't decide whether you need HSS or carbide tips?
Click here...

Click here for User's Manual

Click here for planer comparison chart

    2" DUST PORT

Average Rating: 5 of 5 Total Reviews: 8 Write a review »

  0 of 0 people found the following review helpful:
Very fast shipping and nice product September 13, 2019
Reviewer: Mike D from Southeast Louisiana  
I placed my order on 9/12/19 about 2:30pm and received the planer today 9/13/19. My fist planer so I will be in the learning curve hopefully for not long. 1st board I ran had a little snipe at the beginning and end. Other than that, the craftsmanship that was put into this piece is great. I have been looking at planers, came across Cutech as a recommended brand on a forum and started researching them. Glad I did. I will be purchasing the jointer aswell.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Glad I choose to buy this. March 17, 2018
Reviewer: Curtis Adams from Kettering, OH  
I have been looking to purchase a planner for some time. I wanted the best value for my budget and after much research decided this was the one I should buy. When I received and setup my planer, I couldn't have been happier with my choice. The quality of my planer is above what I  expected and produces outstanding results. Additionally, the customer support is second to none. Looking forward to many years of use and continued support.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Great planer, love it, should have bought sooner February 28, 2018
Reviewer: Stephen Greenert from KY, United States  
After a few informative"talks" with Mike the tech guy I finally pulled the trigger on this planer (40700HC-CT). So glad I did, planer arrived in 2 days in good condition, set up was easy, followed all directions for checking planer for first run. First tried on 6" wide x 32" poplar rough sawn and it cut beautifully. Moved on to 6" x 32" long rough sawn oak (skid material) and result was the same. I should have got this before now but am now glad I have it. Thanks for building a quality product.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Planner February 15, 2018
Reviewer: Robert D Hill from Fincastle, VA United States  
This a great tool. We are having a blast with it. Probably planned over 400 pallet boards so far and the spiral cutterheads have done everything we have thrown at them, pine, oak even a little walnut.
Still have a pile of boards to finish, then we will need to go out and find more wood.
This is our first planner, just sorry we didn't buy this little monster sooner.
Also got the 80200CT stand, fits perfect with the planner so it is a great combination.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Pretty darn good January 14, 2018
Reviewer: Mick Hayes from Soda Springs, ID United States  
Bought the planer and the jointer on the holiday bundle for $699.00. I have used them both now several times and I like them both a lot. Very nice quality for the money. I am a beginner woodworker, and these fit my needs perfectly. The jointer is my fave. When and if I upgrade I will buy Cutech or Dewalt.

Was this review helpful to you?

View All Customer Reviews